Monitoring the Behavior of Segment Joints in a Shield Tunnel Using Distributed Fiber Optic Sensors

Xing Wang 1, Bin Shi 1, Guangqing Wei 2, Shen-En Chen 3, Honghu Zhu 1, Tao Wang 1

1. School of Earth Sciences and Engineering, Nanjing University, Nanjing, 210023, China;

2. Nanzee Sensing Technology Co., Ltd, Suzhou, 215123, China

3. Department of Civil and Environmental Engineering, University of North Carolina at Charlotte, NC 28223, USA

Structural Control and Health Monitoring, 2018; 25: e2056

DOI: 10.1002/stc.2056

Abstract: Shield tunneling is a popular tunnel construction technique for its efficiency and speed. However, uncertainties associated with site soil conditions, past loading histories and analytical modeling, can result in performance issues. To monitor shield tunnels and ensuring performance and safety, fiber optic sensing technique is proposed. Based on Brillouin optical frequency-domain analysis (BOFDA), the technique can monitor the opening and closing of segmental joints in shield tunnels with high sensitivity. To determine tunnel lining segment displacement, different fixed-point spacings have been tested in the lab. The test results show that the difference in fixed-point distances had no impact on the test accuracy and the sensing cable with 0.9 mm Polyurethane sheath coater has the best performance. For demonstration, the BOFDA-based monitoring technique is applied to the Suzhou Metro Line 1 tunnel for tunnel lining segment joint monitoring. The technique detected minor deformation of the segment joints in tunnels in operation and located leakages within the tunnel. The technique further identified that the minor deformations of the segment joints and track bed expansion were closely associated with temperature variations. 

Key words: Shield tunnel; segment joints; deformation; BOFDA; fiber optic sensing; installation

References
1. Y Koyama, Present status and technology of shield tunneling method in Japan. Tunnelling and Underground Space Technology. 2003, 18(2),145-159.
2. J Chen,H Mo, Study on effect of segments erection tolerance and wedge-shaped segment on segment ring in shield tunnel. Journal of Zhejiang University-SCIENCE A. 2006, 7(11),1864-1869.
3. H S Chou, C Y Yang, B J Hsieh, et al., A study of liquefaction related damages on shield tunnels. Tunnelling & Underground Space Technology. 2001, 16(3),185-193.
4. A Haack, J Schreyer,G Jackel, State-of-the-art of Non-destructive Testing Methods for Determining the State of a Tunnel Lining. Tunnelling and Underground Space Technology incorporating Trenchless Technology Research. 1995, 4(10),413-431.
5. N Delatte, S E Chen, N Maini, et al., Application of Nondestructive Evaluation to Subway Tunnel Systems. Transportation Research Record Journal of the Transportation Research Board. 2003, 1845(3),127-135.
6. R H Bassett, J P Kimmance,C Rasmussen, An automated electrolevel deformation monitoring system for tunnels. Geotechnical Engineering. 1999, 137(3),117-125.
7. S MIURA, T YAMAMOTO,I KURONUMA, Vision metrology applied for configuration and displacement. International Journal of the JCRM. 2005, 1(1),1-6.
8. H Mohamad, K Soga, P J Bennett, et al., Monitoring Twin Tunnel Interaction Using Distributed Optical Fiber Strain Measurements. Journal of Geotechnical and Geoenvironmental Engineering. 2012, 138(8),957-967.
9. H Mohamad, P J Bennett, K Soga, et al., Behaviour of an old masonry tunnel due to tunnelling-induced ground settlement. Géotechnique. 2010, 60(12),927-938.
10. Z-P Song, D Zhang, B Shi, et al., Integrated distributed fiber optic sensing technology-based structural monitoring of the pound lock. Structural Control and Health Monitoring. 2016.
11. H-H Zhu, B Shi, J Zhang, et al., Distributed fiber optic monitoring and stability analysis of a model slope under surcharge loading. Journal of Mountain Science. 2014, 11(4),979-989.
12. R Moffat, J Sotomayor,J F Beltrán, Estimating tunnel wall displacements using a simple sensor based on a Brillouin optical time domain reflectometer apparatus. International Journal of Rock Mechanics and Mining Sciences. 2015, 75,233-243.
13. K Fujihashi, K Kurihara, K Hirayama, et al., Monitoring System Based on Optical Fiber Sensing Technology for Tunnel Structures and Other Infrastructure. 2005: Springer Netherlands. 185-195.
14. H Naruse, K Komatsu, K Fujihashi, et al., Telecommunications tunnel monitoring system based on distributed optical fiber strain measurement. Proc Spie. 2005, 5855,168-171.
15. B Shi, XJ Xu, D Wang, et al. Study on BOTDR-Based Distributed Optical Fiber Strain Measurement for Tunnel Health Diagnosis. Chinese Journal of Rock Mechanics and Engineering. 2005, 24(15):2622-2628.
16. C Li, Y G Zhao, H Liu, et al., Combined Interrogation using an Encapsulated FBG Sensor and a Distributed Brillouin Tight Buffered Fiber Sensor in a Tunnel. Structural Health Monitoring. 2010, 9(4),341-346.
17. N Nöther, A Wosniok, K Krebber, et al., A distributed fiber-optic sensing system for monitoring of large geotechnical structures. Proc. of SHMII-4, 2009. 2009.
18. R Bernini, A Minardo,L Zeni, Reconstruction technique for stimulated Brillouin scattering distributed fiber-optic sensors. Optical Engineering. 2002, 41(9),2186-2194.
19. Y Lu, B Shi, G Q Wei, et al., Application of a distributed optical fiber sensing technique in monitoring the stress of precast piles. Smart Materials and Structures. 2012, 21(11),115011.
20. Ministry of housing and urban-rural Development of the People’s Republic of China(MOHURD). Code for monitoring measurement of urban rail transit engineer. China Architecture & Building Press, 2014.
21. B Shi, H Xu, B Chen, et al., A Feasibility Study on the Application of Fiber-Optic Distributed Sensors for Strain Measurement in the Taiwan Strait Tunnel Project. Marine Georesources & Geotechnology. 2003, 21(3-4),333-343.